Sun Microsystems Sun Fire V1280 Скачать руководство пользователя страница 60

Страница: 60 / 64

A-8

Sun Fire V1280/Netra 1280 Systems Installation Guide • May 2006

A.3.2

Using a DB-9 Adapter for Your Serial Link

Connect serial A to a DB-9 (9-pin) adapter to connect to a terminal that has a 9-pin
serial connector.

TABLE A-6

lists the pin interconnections.

A.3.2.1

Connecting to a Male 9-Pin D-Type Serial Port

1. Connect one end of the RJ-45 patch cable to Serial A and the other end to the DB-

25 adapter (supplied with the system).

2. Connect the DB-25 adapter to an adapter that has one 25-way female connector

and one 9-way D-type female connector.

Sun does not supply a 25x9-way D-type female-to-female adapter.

3. Connect the male end of a 9-pin serial cable to the 25x9-way D-type female-to-

female adapter and the other end to the 9-pin serial port on the administrative
console.

TABLE A-6

Pin Interconnections Performed by a DB-9 (9-pin) Adapter

Serial Port (RJ-45 Connector) Pin

9-Pin Connector

Pin 1 (RTS)

Pin 8 (CTS)

Pin 2 (DTR)

Pin 6 (DSR)

Pin 3 (TXD)

Pin 2 (RXD)

Pin 4 (Signal Ground)

Pin5 (Signal Ground)

Pin 5 (Signal Ground)

Pin 6 (RXD)

Pin 3 (TXD)

Pin 7 (DSR)

Pin 4 (DTR)

Pin 8 (CTS)

Pin 7 (RTS)

Содержание Sun Fire V1280

































































Результаты поиска

Содержание Sun Fire V1280

Отзывы:

Похожие инструкции для Sun Fire V1280

Бренды по названию

Популярные бренды

Sun Microsystems Sun Fire V1280, Руководство по установке

Результаты поиска

Содержание Sun Fire V1280

Отзывы:

Похожие инструкции для Sun Fire V1280

Бренды по названию

Популярные бренды