Sun Microsystems Sun Blade X6440 s, Руководство по установке

Страница: 10 / 68

2 Sun Blade X6440 Server Module Windows Operating System Installation Guide • June 2008
Installation Prerequisites
The Sun Blade X6440 server modules require additional server-specific drivers that
are not included with the Windows Server operating system. The following chapters
in this document describe how to access and install the operating system and
drivers. The installation procedures apply to both the 32-bit and 64-bit versions of
Microsoft Windows Server 2003/2008.
Depending on the installation methods chosen, a USB hub may be required. Before
you begin, make sure you have access to the following:
■
Windows Server installation media
■
Sun Blade X6440 server module installation media
■
USB keyboard and mouse
■
Monitor
■
USB CD/DVD
■
USB floppy drive and diskette
■
USB hub (depending on installation method chosen)
■
USB dongle connector with at least two ports to connect to the front slot of the
Sun Blade X6440 server module
Note – Your server module has only two USB ports. Use the dongle cable included
with the system to attach a USB hub for the keyboard, mouse, and CD drive if
needed. The second USB port is then available for a USB diskette drive.
Important Installation Considerations
Please note the following important considerations before beginning the Windows
Server operating system installation on a Sun Blade X6440 server module:
■
When you install the Windows operating system, any data on the boot drive,
including any preinstalled operating system, will be overwritten.