Sun Microsystems Sun Blade T6320, Руководство пользователя

Страница: 22 / 22

14 Sun Blade T6320 XAUI Pass-Through Fabric Expansion Module User’s Guide • July 2008
Find the SunVTS documentation at:
http://docs.sun.com/app/docs/prod/vts64#hic
Using the SunVTS
xnetlbtest
The
xnetlbtest
provides functional test coverage of the network products based
on Neptune Ethernet chip/core. Refer to the SunVTS 6.4 Test Reference Manual for
SPARC Platforms , for complete
xnetlbltest
information.
xnetlbtest
Test Requirements
The NEM has an internal loopback path built in. You do not need an loopback
connector. You must have the Ethernet card (the FEM) and the device driver
installed. Intervention mode is enabled before running
xnetlbtest
.
xnetlbtest
cannot run and does not appear in the GUI if the network interface is connected to a
live network.
xnetlbtest
also requires that the Ethernet device be configured
offline before running the test. Use the
ifconfig(1M)
command to bring the
Ethernet device down before running
xnetlbtest
. Enter the following commands
to bring the interface down:
Where nxge0 is the 10GbE port on your server module.
TABLE B-1
SunVTS Documentation
Title Description
SunVTS 6.4 Test Reference Manual for SPARC Platforms Describes each SunVTS test (including
xnetlbtest
).
Describes test options and command-line arguments
SunVTS Quick Reference Card Provides an overview of the user interface
SunVTS 6.4 Patch Set 3 Release Notes Updates to the other SunVTS documents.
SunVTS 6.4 Patch Set 3 Documentation Supplement for
SPARC Platforms Updates to the other SunVTS documents specific to this
patch set.
# ifconfig nxge0 down
# ifconfig nxge0 unplumb