Sun Microsystems SUN BLADE 150, Руководство по обслуживанию

Страница: 175 / 218

C-1
A P P E N D I X
C
Functional Description
This appendix provides a functional description of the Sun Blade 150 system.
■
Section C.1, “System” on page C-1
■
Section C.2, “Motherboard” on page C-3
■
Section C.3, “Riser Board” on page C-4
■
Section C.4, “Jumper Descriptions” on page C-5
■
Section C.5, “Motherboard Components” on page C-6
■
Section C.6, “Reset Types” on page C-13
■
Section C.7, “Clocking” on page C-13
■
Section C.8, “Power Control” on page C-15
■
Section C.9, “Memory Architecture” on page C-18
■
Section C.10, “Address Mapping” on page C-22
■
Section C.11, “Interrupts” on page C-25
■
Section C.12, “Power” on page C-25
C.1 System
The Sun Blade 150 system is an UltraSPARC port architecture-based uniprocessor
machine that uses the peripheral component interconnect (PCI) as the I/O bus. The
CPU and ATI graphics ASIC communicate with each other using the PCI protocol.
The following figure shows a functional block diagram of the system.