Sun Microsystems Sun Adapter forTCP/IPHL7 Скачать руководство пользователя страница 52

Страница: 52 / 150

TABLE 17

Connectivity Map - TCPIP Outbound Settings

(Continued)

Name

Description

SoLinger

An indicator of whether the adapter performs a “linger-on-close” timeout. This
option disables or enables an immediate return from a call to the

close()

method

for a TCP Socket. To enable the linger-on-close timeout, select

true

; otherwise,

select

false

If you enable this property, specify the maximum length of the timeout in the

SoLinger Timeout

property.

SoLinger Timeout

The server’s linger–on–close timeout in seconds. Use

SoLinger Timeout

when

SoLinger

is set to true (see the description for

SoLinger

above). You can specify

an integer between -1 and 65535. The default is -1 seconds, which indicates that
the

SoLinger

option is disabled.

When

SoLinger

is set to

true

, the

SoLinger Timeout

value indicates the

following:

■

A non-zero integer

means that calling

close()

will block pending the

transmission and acknowledgement of all data written to the peer. When all

data is written, the socket is closed gracefully. Upon reaching the linger

timeout value specified here, the socket is closed forcefully with a TCP RST. If

the specified timeout value exceeds 65,535 it will be reduced to 65,535.

■

A zero integer

means that a forceful close is performed immediately.

SoTimeout

The value of the SoTimeout in milliseconds. You can enter a value greater than or
equal to zero (

). When set to zero (

), the timeout is infinite.

With this option set to a non-zero value, calling the

read()

method on the input

stream associated with this socket will block for only the configured length of
time. If the timeout expires, a

java.io.InterruptedIOException

java.net.SocketTimeoutException

is thrown, but the socket remains valid.

Enable this option prior to entering the blocking operation.

TcpNoDelay

An indicator of whether data packets that are smaller than the maximum transfer
unit (MTU) size are sent out immediately over the network (this refers to Nagle’s
algorithm). Select one of the following options:

■

True

– Indicates that the server allows data packets that are smaller than the

MTU size to be sent out immediately over the network. This can improve

performance for higher-speed networks.

■

False

– Indicates that the server does not allow data packets that are less than

the MTU size be sent out immediately over the network.

This is used for the accepted client socket.

TCP/IP HL7 V2 Adapter Outbound Connectivity Map Properties

Sun Adapter for TCP/IP HL7 User's Guide • October 2009

Содержание Sun Adapter forTCP/IPHL7























































































































































Результаты поиска

Содержание Sun Adapter forTCP/IPHL7

Отзывы:

Бренды по названию

Популярные бренды

Sun Microsystems Sun Adapter forTCP/IPHL7, Руководство пользователя

Результаты поиска

Содержание Sun Adapter forTCP/IPHL7

Отзывы:

Бренды по названию

Популярные бренды