Sun StorEdge N8200 Filer Installation, Configuration, and Service Guide
9
▼
To Set Up the Initial System Configuration
This section describes how to set up and configure the filer to communicate with the
network hosts.
Note –
Before you start this procedure, review Step 4 to identify the required
information to obtain from your network administrator.
1. Establish communications with the controller from your system by doing one of
the following:
a. For Sun and other UNIX systems, type:
where x = a or b
b. For systems using Microsoft Windows 95, 98, or NT:
i. Choose: Start
→
Run.
The Run dialog box is displayed.
# tip -9600 /dev/tty
x
