Sun Microsystems storedge L100, Руководство по установке

Страница: 29 / 40

Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library Installation Guide
Document 6423015-01, Ver. 1, Rel. 0
June 2002
Connecting the Library to AC Power 29
Connecting the Library to AC Power
0
This section explains how to connect the library to AC power.
L25 Power
Requirements
0
To connect the L25 library to AC power:
1
Referring to table 4 , select appropriate AC distribution unit(s) for
your library configuration and input voltage.
2
Connect the power cable (provided in the accessories kit) to the
power inlet on the back of the library (see figure 23 ) and to the AC
distribution unit.
Figure 23 Power Inlet
Warning:
AC distribution units (power strips) must be certified
for safety by an agency acceptable to the country of
use. For use in the United States and Canada,
distribution units must be UL listed and CSA
certified. For use in Europe, distribution units must
be CE marked. National certifications for other
countries depend on local requirements.
Power inlet