Sun Microsystems STOREDGE A5000, Инструкция по установке и обслуживанию

Страница: 58 / 146

5-6 Sun StorEdge A5000 Installation and Service Manual • September 1999
5.5 Set-Up 1
Screen saver: The screen saver for the disk array activates after one to four minutes of
FPM inactivity. The Box Name (or the World Wide Name if the Box Name is not set)
displays randomly around the screen when the screen saver is active. To exit, press
anywhere on the FPM.
To stop the screen saver from activating, press the screen saver button.
Set-up screen: You can enter multiple changes at the same time on the Set-Up screen.
For instance, if you want to change the Loop Type and Box ID, set the values for
these attributes. Exit the screen using the Back screen key. The Confirm screen will
be displayed.
Caution –
Changing the Box ID or Loop Type causes the disk array to reset. If any
disks in the disk array are involved in any I/O activity, a loss of data can result.
Brightness
Box ID (0-3)
Loop (split/single)
Screen saver
Set-up 1 screen Set-up 2 screen Confirm screen