Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 98 / 176

5-28 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
TABLE 5-25
describes the arguments associated with the
create initgroup
subcommand.
5.3.9.3 Adding an Initiator Group
Use this command to add one or more devices to the initiator group name in the
initiator group. Specify the device by its worldwide name (WWN). The
sscs add
initgroup
command-line syntax is shown below.
TABLE 5-26
describes the arguments associated with the
add initgroup
subcommand.
5.3.9.4 Deleting an Initiator Group
Use this command to delete the initiator group. The initiator group must exist in the
specified array. The
sscs delete initgroup
command-line syntax is shown
below.
TABLE 5-25
sscs create initgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specifies an array-name up to 40 characters long.
initgroup
initgroup-name Specifies an initiator group by name. initgroup-name can be
up to 16 characters long.
# sscs add -a
array-name
-i
wwn1
,
wwn2
,..
.
initgroup
initgroup-name
TABLE 5-26
sscs add initgroup
Command-Line Arguments
Argument Description
-a,--array
array-name Specify an array-name up to 40 characters long.
-i,--initiator
wwn Specify the device by its WWN. The wwn can be up to 16 hex
characters. For example,
-i 210000e08b047212
.
initgroup
initgroup-name Specifies an initiator group by name. The initgroup-name can
be up to 16 characters long.
# sscs delete -a
array-name
initgroup
initgroup-name