Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 86 / 176

5-16 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
TABLE 5-8
describes the arguments associated with the
modify ntp
subcommand.
5.3.4.3 Modifying the Date and Time
Use this command to modify the date and time on the Storage Service Processor
with the following arguments and options.
Note – To specify a four-digit year, use the cc and yy options
The
sscs
modify date command-line syntax is shown below.
TABLE 5-9
describes the arguments associated with the
modify date
subcommand.
TABLE 5-8
sscs modify ntp
Command-Line Arguments
Argument Description
-d Disable the use of the NTP server. The use of ip-address is optional in
this case.
-e Enable the use of the NTP server specified by the ip-address option.
You must specify the server IP address.
ip-address Specifies the NTP server IP address.
# sscs modify -G { true | false} date [ [
mmdd
]
HHMM
|
mmddHHMM
[
cc
]
yy
[
.SS
] ]
TABLE 5-9
sscs modify date
Command-Line Arguments
Argument Description
-
G,--GMT {true |
false}
Specifies enable (true) or disable (false) for Greenwich Mean
Time (GMT).
mmdd Specifies the month and day number. For example, 0331 for
March 31.
HHMM Specifies the hour and minute. The hour number is based on a
24-hour clock; for example, 1:30 PM is 1330.
cc Specifies the century minus one. For example, specify the
twenty-first century as 20.
yy Specifies the two-digit year number.
SS Specifies the seconds of the hour.