Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 79 / 176

Chapter 5 Sun StorEdge Configuration Service Software 5-9
5.3 Using the Command-Line Interface
This section describes the
sscs
command line and options. The
sscs
(1M) command
enables you to perform the same software operations as those available on the web
browser. Any changes made using this command are shown in the web-browser user
interface when you refresh or reload the related page in your browser.
The
sscs
command has an inactivity timer of 30 minutes to address security
concerns. If you don’t issue any
sscs
commands for 30 minutes, the session is
terminated. When you issue a command after the time out, you will be told to log in
first.
This section is organized as follows:
■
“Command Syntax and Usage Summary” on page 5-9
■
“Logging In and Out” on page 5-13
■
“Administering Users” on page 5-13
■
“Configuring System Settings” on page 5-14
■
“Managing the Sun StorEdge 6020 Arrays” on page 5-18
■
“Managing Storage Pools” on page 5-20
■
“Managing Sun StorEdge 6020 Array Volumes” on page 5-22
■
“Managing Volume Groups” on page 5-24
■
“Managing Initiators and Initiator Groups” on page 5-27
■
“Displaying Jobs, Logs, System Setting, and Array Components” on page 5-29
5.3.1 Command Syntax and Usage Summary
The
sscs
command is the command-line interface (CLI) for the software. The
sscs
command enables you to manage the storage components in your array, such as
initiators, volumes, and so on. These commands are the CLI equivalent of functions
that are also available from the web-browser user interface.