Sun Microsystems StorEdge 6320 System 1.0, Справочное и сервисное руководство

Страница: 132 / 176

9-8 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
9.4 Adding a Second Cabinet
Use the following procedure to add a second cabinet to a single Sun StorEdge 6320
system.
Note –
The names of the Sun StorEdge 6020 arrays in the second cabinet are shown
in
FIGURE 3-1
.
1. Set up the second cabinet, connect the cables, and follow the remaining
procedures for setting up the second cabinet as described in the Sun StorEdge 6320
System Installation Guide.
2. Enter MAC address for the Sun StorEdge 6020 arrays into the Storage Automated
Diagnostic Environment using the procedure in “Entering the MAC Address” on
page 12-6
Tip –
Refer to Sun StorEdge 6020 and 6120 Arrays Installation Guide for instructions
about how to locate the MAC address.
3. Set passwords on all Sun StorEdge 6020 arrays that are in the new cabinet.
Use the instructions in the “Setting the Array Password” on page 12-8 to set the
passwords.
4. Create a updated inventory file using the Storage Automated Diagnostic
Environment.
Instructions for this procedure are given in “Creating an Updated Inventory” on
page 12-8.