Sun Microsystems StorageTek T10000, Руководство оператора

Страница: 29 / 120

Interface with the Tape Drive
96174 • Revision EA Chapter 1 Introduction 27
Library Drives
Host operation of a library-attached T10000 drive is by means of the library firmware
through the drive’s rear panel TTI connection (see
FIGURE 1-2 on page 22
). Manual drive
operations, such as configuration settings and utilities, can be directed by VOP through
the drive’s rear panel Ethernet maintenance port (see
FIGURE 1-2 on page 22
).
The following libraries support the T10000 tape drive:
■
SL3000
■
SL8500
■
L180
■
L700e
■
L1400M
■
9310 (T10000A only)
Rack Mount Drives
Operation of rack mounted drives, by an operator, is normally through the drive tray
chassis physical operator panel (see
“Operator Panel Controls/Indicators” on page 34 ).
However, operation can also be through VOP, connected to the drive tray chassis rear
panel Ethernet ports (see
FIGURE 2-3 on page 37
).