Sun Microsystems StorageTek PCI-X Enterprise Скачать руководство пользователя страница 23

Страница: 23 / 64

Installing, Connecting, and Testing the Host Bus Adapter

3. The client boots from the boot/install server, the interactive

suninstall

(1M)

application starts, and the system administrator provides configuration information
requested at the prompts.

4. After the system administrator provides all configuration information requested by

the installation program, the installation of the Solaris operating environment
begins.

5. The install image is copied to the client.

6. Before a reboot, while the client is still booted from the boot image mini-root, the

driver and any needed patches are copied from the boot/install server and then
installed in the

install image

You install the driver package and patch the install image so that the host will be
able to see the host adapter after a reboot.

Note –

You can not use Jump Start until you modify the install image.

7. The host boots from the boot disk through the network adapter.

▼

To Set Up the Boot/Install Server

1. Switch users to root on the host to be used as the boot/install server.

2. Use the

setup_install_server

(1M) command from the

Tools

directory in the

location where the Solaris software resides.

As shown in the following screen example, the

setup_install_server

command

copies the boot image to a directory on the boot/install server. (The boot directory is
named

/boot_dir

original_OS_dir

>/Boot

in the example.) The example shows the

command being run from the

Tools

directory on a mounted Solaris 8 installation

CD-ROM.

Password:

cd /cdrom/cdrom0/s0/Solaris_8/Tools

./setup_install_server -t

original_OS_dir

>/Boot /<

new_OS_copy_dir

Содержание StorageTek PCI-X Enterprise

































































Результаты поиска

Содержание StorageTek PCI-X Enterprise

Отзывы:

Бренды по названию

Популярные бренды

Sun Microsystems StorageTek PCI-X Enterprise, Руководство по установке

Результаты поиска

Содержание StorageTek PCI-X Enterprise

Отзывы:

Бренды по названию

Популярные бренды