Operation
19
3
Loading a Tape Cartridge
Figure 3-3
Loading a Tape Cartridge
To load a tape cartridge into the tape drive:
1. Make sure that the Operate Handle LED is on (Figure 3-1).
2. Lift the cartridge insert/release handle (Figure 3-3).
3. Insert the cartridge into the tape drive.
4. Push the handle closed.
Note – To prevent handle failures, do not flip the handle closed.
The Operate Handle LED turns off and the Tape In Use LED blinks to show
the tape is loading. When the tape is at the BOT marker, the Tape In Use
LED turns on steady. The tape is now ready for use.
2
4
3
