10
Sun RSM Array 2000 Controller Module Installation Guide • October 1997
c. Move to the front of the cabinet and align the support rails horizontally behind
the vertical rails of the cabinet.
The foot of the support rail should align with the mark on the front vertical rail
near hole 55 (
FIGURE 1-8
).
d. Attach the front of the support rails to the cabinet rails with three #8 screws.
4. Tighten all mounting screws (front and back) in both support rails.
Do not tighten the screws on the mounting clamps (
FIGURE 1-16
on page 20).
FIGURE 1-8
Attaching the Support Rail to the Front of Cabinet
Three #8 screws
in holes 56, 59,
and 62
Hole 55
Mark
