8
Refer to panel 9 for more information.
1
Remove the front bezel by squeezing the latches at each end.
2
Disassemble the system and remove the PCI card (if fitted) as shown in
panel 5.
3
Squeeze and pull out the blanking panel.
4
Slide the connector card
into the slot behind the CD-ROM drive bay.
5
Connect the cable to the connector
under the PCI card.
6
Slide in the CD-ROM drive until the catch clicks.
7
Replace the other components in the reverse order to that in which you removed
them.
1
4
6
5
Installing the CD-ROM Drive
806-1552-10-A.doc Page 2 Tuesday, July 27, 1999 12:39 PM
Blue spot plate
