Sun Microsystems Netra 240, Руководство по обслуживанию

Страница: 52 / 154

34 Netra 240 Server Service Manual • June 2004
Bezel Assembly
The bezel assembly includes the bezel, the server status indicator board, the alarm
LEDs, and the hinges (
FIGURE 3-1
). The assembly is replaced as a single unit.
Removing the Bezel Assembly
1. Power off the server.
See “Powering Off the Server” on page 22 .
2. Ensure that the server is properly grounded.
See “Avoiding Electrostatic Discharge” on page 32 .
3. Grip the bezel at the two finger holds and rotate it down to its open position
(
FIGURE 3-1
).
FIGURE 3-1
Finger Holds on the Bezel
4. Disconnect the bezel cables (the server status indicator cable and the alarm LED
cable) connecting the bezel assembly to the server (
FIGURE 3-2
).
CRITICAL
MAJOR
MINOR
USER
Green finger holds