4. Flip the assembly over and extend the runner as out as far as possible, then use
as many nuts and bolts as possible to loosely secure the long bracket to the
short bracket/slide assembly.
You should be able to use 2 to 5 nuts and bolts to loosely secure the brackets
together, depending on the distance between the ends of the two brackets. Do not
tighten the nuts and bolts at this time.
1. The instructions in the sections Cabling the Model 150 Server, Restoring the
Expansion Cabinet and Powering On the Expansion Cabinet (pages 2-16 through
2-22) apply to Sun cabinets only; refer to the manual that you received with your
generic cabinet for instructions on cabling, replacing the outer panels and
powering on your cabinet.
Netra 150 Server Product Note
7
