Sun Microsystems Ethernet Device Driver none, Руководство по эксплуатации продукта

Страница: 36 / 36

28 Platform Notes: The hme Fast Ethernet Device Driver—May 1996
4
4. Create the
hme.conf
file in the
/kernel/drv
directory using a text editor
and add lines similar to the following to the file:
•
Specify
name=”hme”
and
class=”sbus
.
”
•
Use the
reg
property to specify the device,
0xe
in this case. Use the value
following
Bus Type
in the
prtconf -v
output.
•
Type the addresses followed by the specified sizes. Precede each size with
0x
and leading zeros, as indicated in the following screen.
•
Set
ipg1
and
ipg2
. These parameters are set to 20 and 10, respectively,
in this example. Type a semicolon ( ; ) after the last value. The
ipg
parameters are defined in Chapter 3.
5. Save the
hme.conf
file.
6. Save and close all files and exit all programs; exit the windowing system.
7. Reboot the system by typing the
init 6
command at the
#
prompt.
name=”hme” class=”sbus”
reg=0xe,0x8c00000,0x00000108,0xe,0x8c02000,0x00002000,0xe,
0x8c04000,0x00002000,0xe,0x8c06000,0x00002000,0xe,0x8c07000,
0x00000020
ipg1=20 ipg2=10;