8
Enterprise Tape Library 4/1000 Installation Guide for Sun Systems—January 1997
Powering Off Your Sun System
Turn the on/off switch to the off (O) position for each device of your Sun
system in the following order:
1. Any peripheral drive units
2. Sun system
3. Monitor
Warning
– After the power switches are turned to the off (O) position, the
green light-emitting diodes (LEDs) on all units should not be lit and the fans
should not be running. All power cords should remain plugged into each unit
and wall outlets to prevent damage to the equipment by static electricity from
your body.
Caution
– Always wait 30 seconds between turning off the power and turning
it back on again. This pause prevents possible damage to power supply
components.
!
