Sun Microsystems E25544-02, Руководство пользователя

Страница: 46 / 90

36 Sun Dual Port 10GBase-T Adapter User’s Guide • July 2012
■
“Boot Over the Network (PXE)” on page 36
■
“Boot Over a 10 GbE Network (Oracle Solaris x86 and Linux)” on page 36
■
“Install Oracle Solaris 10 Over a Network (Oracle SPARC)” on page 38
▼
Boot Over the Network (PXE)
PXE network boot is an environment to boot computers using a network interface
independently of available data storage devices (such as hard disks) or installed
operating systems. No boot media is required on the client system. With PXE, you
can install an x86-based client over the network by using
DHCP .
●
Boot over the network using PXE.
Refer to the booting with PXE instructions in the Oracle Solaris 10 Installation
Guide: Network-Based Installations for more information at:
http://docs.oracle.com/cd/E23823_01/index.html
Related Information
■
“Create Driver Instance Files (Oracle Solaris 10)” on page 34
■
“Configure the Network Host Files (Oracle Solaris 10)” on page 34
■
“Boot Options” on page 35
■
“Boot Over a 10 GbE Network (Oracle Solaris x86 and Linux)” on page 36
■
“Install Oracle Solaris 10 Over a Network (Oracle SPARC)” on page 38
▼
Boot Over a 10 GbE Network (Oracle
Solaris x86 and Linux)
1. Obtain the MAC address of the first Adapter port by checking the label of the
Adapter.
For the Adapter, the MAC address on the label is for the first port. The second
port’s MAC address is the MAC address from the label, plus 1.
2. Set up the PXE boot server with the MAC addresses.
3. Plug the Ethernet cable into the Adapter’s port.