Sun Microsystems DGA 5000, Руководство оператора

Страница: 77 / 84

Note:
The three statuses will be run in sequence upon power-up or when
returning from standby mode.
a. The Zero-calibration and HC residue check will be run in
sequence following the manual initiation of an auto-calibration.
b. An automatically triggered auto-calibration will not be followed
by an HC residue check.
c. In the event of maintenance function (e.g. leak check) being
selected whilst a power-up or manually initiated auto-calibration is
in progress, the auto-calibration pop-up window will be displayed
and the auto-calibration will be completed. The subsequent HC
residue check will be postponed or aborted until the maintenance
mode is exited.
9.8 The Error/Warning Button
The “Error/warning” button will appear on the right hand side of the
toolbar whenever an error or warning condition is detected. Examples of
such conditions are messages concerning the status of the O
2
Sensor,
insufficient gas flow, daily leak check requirement etc.
•
Select the Error/Warning button in order to review the error/warning
messages.
The Error/Warning pop-up window will be displayed showing the
error/warning code together with a brief description of the cause of
the error/warning message.
The Error/Warning pop-up window may be closed at any time by
selecting the “Close” button.
The Error/Warning button will disappear automatically when the
conditions giving rise to the error/warning message(s) are rectified.
Error/Warning codes and messages may be of two types:
Messages relating to the DGA 5000 system.
- Messages relating to the gas bench
The possible error codes are show by the tables below.
68
T
HE
E
RROR
/W
ARNING
B
UTTON