Sun Microsystems 806-2989-10, Инструкция по установке и эксплуатации

Страница: 59 / 80

Chapter 4 Configuring Driver Parameters 39
In the following example, the
adv_autoneg_cap
and
adv_1000fdx_cap
parameters are set for all Sun GigaSwift Ethernet devices. (See the
driver.conf(4)
man page for more information.)
In the following example, the
adv_autoneg_cap
and
adv_1000fdx_cap
parameters are set for a single instance of the Sun GigaSwift Ethernet device.
3. Save the
ce.conf
file.
4. Save and close all files and programs, and exit the windowing system.
5. Shut down and reboot the system.
GigaSwift Ethernet Driver Operating
Statistics
These statistics are part of the statistics presented by the
netstat -k
command.
TABLE 4-10
describes the read-only Media Independent Interface (MII) capabilities.
These parameters define the capabilities of the hardware. The Gigabit Media
Independent Interface (GMII) supports all of the following capabilities.
adv_autoneg_cap=0 adv_1000fdx_cap=0
name=pci108e,abba parent=pci@4,4000 unit 4 adv_autoneg_cap=0
adv_1000fdx_cap=0;
TABLE 4-10
Read-Only
ce
Device Capabilities
Parameter Description (Local interface Capabilities)
cap_autoneg
0 = Not capable of autonegotiation
1 = Autonegotiation capable
cap_1000fdx
Local interface full-duplex capability
0 = Not 1000 Mbit/sec full-duplex capable
1 = 1000 Mbit/sec full-duplex capable
cap_1000hdx
Local interface half-duplex capability
0 = Not 1000 Mbit/sec half-duplex capable
1 = 1000 Mbit/sec half-duplex capable