- 7 -
- 28 -
EXPLOSION VIEW & PARTS FOR DRY TOILET
#
PART
DESCRIPTION
1 PP-TOILS-0208CX Toilet Seat White
PP-TOILS-0208DX Toilet Seat Bone
2 PF-BOWLL-0246FX AF Bowl Liner
3 PP-CAP00-0587XX Tap Cap Bone
PP-CAP00-0587WX Tap Cap White
4 PM-SCRE0-0250XX #8 X 3/4” (19mm) Flat Head
Philips Screw
5 PF-AIRFL-0001BX Toilet Top Bone
PF-AIRFL-0001XX Toilet Top White
#
PART
DESCRIPTION
6 PM-SCRE0-0251BX #8 X 1/2” (16mm) Stainless
Steel Flat Head Screw
7 PP-WASH0-0274XX CKS Plastic Washer
8 PP-SNAPC-0273XX Snap Cap (Bone)
PP-SNAPC-0273WX Snap Cap (White)
9 PP-AIRFL-003XX Toilet Chute
10 PF-AIRFL-0002BX Toilet Base Bone
PF-AIRFL-0002XX Toilet Base White
Symptom Cause Remedial Action
Prevention
Heating
System Not
Working
(Cont’d)
(Electric
and AC/DC)
Liquid in
Finishing
Drawer
Drum Will
Not Stay
Vertical
Drum Will
Not Turn
Heating Element
Failure
Drum Screen
Clogged
Unit tilted to the
right
Condensation run-
ning down vent
stack
Drum Locker
Broken
Set screw securing
handle to shaft has
broken
Steel pin securing
gear wheel to shaft
has broken
DO NOT use a pressure hose
around the base of the unit.
Install Unit so that weather and/or
groundwater cannot get at the base
of the unit.
Use Proper Bulking Material
Install toilet level or tilting slightly to
the left, DO NOT install the toilet tilt-
ing forwards or to the right. If you
are unsure of the grade of the floor,
install it with a wedge piece.
Remove horizontal sections of vent
pipe and insulate all exposed 2”
(50mm)venting.
When returning the drum to top
dead center position, do not bang
against drum locker with excessive
force. Remember to pull out the
drum locker button before rotating
the drum backwards.
Not a common repair.
Keep composting drum from becom-
ing overloaded. This puts undue
strain on the nylon gear.
Have your serial number ready and call your Sun-
Mar dealer for a replacement. (Detailed instruc-
tions are included with the replacement part)
Please note: Because this part is not easy to
replace, and because there is far less chance
that you will need this part than a thermostat; we
recommend trying to replace the thermostat first.
Use a flashlight to see the screen at the bottom
of the drum. Scrub screen with wire brush. The
overflow drain should be hooked up.
Use a 1/4 - 1/2”(6mm - 12mm) wedge piece
under the right side of the unit to drain liquid
more easily towards the overflow drain of the
unit.
Liquid will be clear or yellowish in appearance.
Make sure all vent pipe exposed to the outdoor is
well insulated and there are no horizontal runs.
Have serial number ready and call your Sun-Mar
dealer for a replacement part.
Drill out set screw and replace, or get handle
replacement kit (instructions included).
Have your serial number ready and call your Sun-
Mar dealer for a replacement Small Gear Kit.
Содержание centrex 2000 af
Страница 2: ... 34 ...