Owner’s Manual — Sunlawn EM--1
4
4. Attach the two-handed safety switch to the top section. Run the
cable along the top side of the handle (so it does not hang down
behind the mower) and close the “clamshell” portion of the safety
switch around the screw holes. Fasten by inserting and tightening the
two screws provided.
5. Secure the cable to the handle using the two Velcro cable keeper
straps.
CONNECTING THE BATTERIES
The batteries come from the factory properly connected. All that is
necessary is to charge them (see section following.)
These instructions are for replacing the batteries if necessary.
WARNING
•
Be careful to connect batteries correctly. Failure to do so
may result in electric shock or damage to the electrical
system of this mower.
•
Close and latch the battery cover before using or servicing
the mower. Otherwise the batteries can fall out, damaging
the mower
!
