Once your cells are in the correct position; it is now time to install your bottom bracket. With our
v3 kits we have made our cell bracket universal and it should fit virtually all cells in the 270-320
AH class.
Install the bottom bracket with the M5 bolts and washers, you can use power tools to assist in
this step.
NOTE:
Ensure the negative and positive signs on the plate match your cells.
Version 3.5 has a notch cut on the upper and lower middle to allow the wires from the rubber
heating elements which provide a channel for the wires into the main battery assembly.
Setting up heating using heated cell-separators (advanced):
The cell separator option is the more advanced heating option available in version 3.5 kits, this
allows 2 cells to be heated by a single silicon rubber heating element; 2 elements in total are
able to heat all 4 cells. The direct contact nature of this option means that the cells will heat up
faster so there is a potential of having a bigger delta in temperature between the cells and the
rest of the case. However, this method will provide for superior cell heating.
Page: 9
V3.5 Manual - Revision 1.2
