Sun Fire X4600 Скачать руководство пользователя страница 52

Страница: 52 / 66

Connecting to the System Console

There are three different ways to connect to the system console.

■

Physical console. See

“How to Connect to the Server Locally (Physical Console)” on page 52

■

Remote console through the ILOM web interface. See

“How to Connect Remotely Using the

ILOM Web Interface” on page 52

■

Serial console through the ILOM command-line interface. See

“How to Connect to the

Serial Console Using the ILOM Command-Line Interface” on page 57

▼

How to Connect to the Server Locally (Physical Console)

If you plan to interact with the system console directly, make the connections described in this
procedure. See

“Server Connections” on page 45

the for the locations of the system connectors.

Perform the hardware setup as described in the hardware setup documentation.

Connect a mouse and a keyboard to the server USB connectors.

Connect a monitor to the server video connector.

For the locations of the USB connectors and the server video connector, see

“Sun Fire X4640

Server Front and Back Panel Features and Components” on page 11

▼

How to Connect Remotely Using the ILOM Web Interface

The requirements for the JavaRConsole (remote console) system are:

■

Solaris, Linux, or Windows operating system is installed.

■

The system must be connected to a network that has access to the server's Ethernet
management port.

■

Java Runtime Environment (JRE) 1.5 or later is installed.

■

If the remote console system is running Solaris OS, volume management must be disabled
for the remote console to access the physical floppy and CD/DVD-ROM drives.

■

If the remote console system is running Windows, Internet Explorer Enhanced Security
must be disabled.

■

The remote console system and ILOM service processor must be set up according to the
instructions in the

Sun Integrated Lights Out Manager (ILOM) Web Interface Procedures

Guide

Before You Begin

See Also

Before You Begin

Connecting to the System Console

Sun Fire X4640 Server Installation Guide • December 2010, Rev A

Содержание X4600



































































Результаты поиска

Содержание X4600

Отзывы:

Бренды по названию

Популярные бренды

Sun Fire X4600, Руководство по установке

Результаты поиска

Содержание X4600

Отзывы:

Бренды по названию

Популярные бренды