Sun Fire X4600, Руководство по установке

Страница: 28 / 66

▼
How to Verify Cable Management Arm (CMA)
Operation
Perform the steps in “How to Attach the Cable Management Arm (CMA)” on page 25 .
Inspect the attached cables for any binding or kinks.
Verify that the CMA extends and does not bind in the slide rails.
Make sure that the power cord cables are secured to the chassis with the clips on each power
supply.
Adjust the cables and CMA as required, and then retest the operation of the slide rails and CMA.
Tip –
To maximize airflow, tie-wrap the power cords at the bottom of the CMA troughs and the
data cables at the top of these troughs.
▼
How to Remove the Cable Management Arm (CMA)
Unplug any power cables and data cables from the server.
Remove the support latch from the CMA extension.
Remove the right inner latch.
This exposes the right outer latch.
Press on the gray tab (labeled Push) on the right outer latch to release the right outer latch.
Remove the CMA extension from the left rear of the rack rail.
Remove the CMA from the slide rail.
“How to Remove the Server From the Rack” on page 29
Before You Begin
1
2
3
4
1
2
3
4
5
6
See Also
Installing the Cable Management Arm (CMA)
Sun Fire X4640 Server Installation Guide • December 2010, Rev A 28