17
2) In V1216 version it has been changed in the option “
Restore to the factory settings
” that serial port
parameters cannot be restored, this character has been continued in V1305 and later version.
Bad Pixels Fixing
This menu is provided to fix the bad pixels automatically and manually.
Please cover the lens with a uniformed-view object before trying to operate, then select options to
fix bad pixels automatically, after this you can select to fix manually. The menu structure is shown as
below:
盲元处理
(Bad Pixels Fixing)
===================
自动盲元处理
(Automatically fix bad pixels)
手动盲元处理
(Manually fix bad pixels )
保存
(Save)
返回
(Return)
退出
(Exit)
Automatically fix the bad pixels: Automatically look-up and fix the bad pixels.
Manually fix bad pixels: Long-press M to enter into edit mode. Press direction keys to move up,
down, left or right cursor to select a bad pixel. Short press M to remark and replace bad pixel, press
it again to cancel operation.
Save: To save all remarked bad pixels into the bad pixel list;
Remark
:
1)
Threshold value of auto bad pixel fixing is set to 100. You cannot see or change this value here;
2)
Before remarking bad pixels it is suggested to make “two-point temperature correction”. When
doing this, please set high temperature to 60
℃
(within 2 degrees of error), and low
temperature to 60
℃
(within 2 degrees of error);
About
In order to enter into this menu, you should choose option “About” from the “Maintenance” menu:
关于
(About)
===================
序列号
(Serial number):123456
程序版本
(Firmware version ):1305
程序日期
(Firmware date):151601181320
ON:
普通
(Common)
挡板
(Whether with shutter or not):
有
/
无
(Yes/No)
调焦电位计
(Focus potentiometer):
有
/
无
(Yes/No)
变焦电位计
(Zoom potentiometer):
有
/
无
(Yes/No)
返回
(Return)
退出
(Exit)
