Sun 24.1-inch LCD Monitor Owner’s Guide
English-8
Getting Help
If your monitor does not display an image, check your cable connections and
refer to “Troubleshooting” on page 24. If you experience difficulties with the
quality of the displayed image, run ‘Auto adjustment’* again and refer to
“Adjusting Your Monitor” on page 11.
*Auto Adjustment is for ‘ANALOG (13W3)’ video only.
Hot Plug Capability
All monitor connections are ‘Hot Pluggable’, meaning they can be connected
or disconnected at any time.
Note: When making computer video cable/source changes, a system
restart may be needed to update the computer’s awareness of the
full resolution required by the monitor. 1920 X 1200 is
recommended as the primary resolution setting.
Plug and Play
Our adoption of the VESA
®
Plug and Play solution eliminates complicated
and time consuming setup. It allows you to install your monitor in a Plug and
Play compatible system without the usual hassles and confusion. Your system
can easily identify and configure itself for use with your display. This
monitor automatically tells the system its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so the system can
automatically configure itself to use the monitor.
Auto Adjustment - ANALOG (13W3) only
Even though your computer can recognize your new monitor, the auto
adjustment feature can optimize the display settings for your system.
1. Turn on your computer and monitor.
2. Push the MENU/SELECT button to open the OSM.
3. Push the down (
) arrow button to activate the ‘Image
Quality’ menu. Figure 1-7, page 9.
