PG 9
BACKPACKING
Your treestand is designed to “nest” together as one
unit making it easy to transport.
1.
Start with the seat climber portion of the stand, set
it on its end as shown in
figure 36
.
2.
Take the platform and slide it into the seat climber.
Overlap the platform frame with the seat climber
frame as shown in
figure 37
. The Platform teeth will
rest up against the V-brace area on the seat climber
as shown in
figure 38a
. You can also overlap the
platform frame as shown in
figure 38b
for a more
compact package.
3.
From this position, pull the seat backrest through
the large gap in the platform as shown in
figure 39
.
4.
Secure the seat to the stand by running the seat
bungee around the frame and clipping it off
(
figure 40
)
5.
The straps will typically be wedged in behind the
seat. Pull them out and around the seat webbing and
push the seat as far down in the frame as possible
(
see figure 41
).
6.
Secure the top and platform together with the 1”
wide green strap with the spring loaded tourniquet
buckle as shown in
figure 42
. This will prevent seat
the seat and the platform from making noise as you
hike to your hunting location.
7.
Use the backpack straps to carry the unit on your
back as shown in
figure 43
. Pull the loose end of the
straps to tighten and pull up on the buckle to release.
36
37
38a
39
40
41
42
38b
43
Содержание VIPER CLASSIC
Страница 12: ......
