- 7 -
You can solve many common wine cellar problems easily, saving you the cost of a
possible service call. Try the suggestions below to see if you can solve the problem before
calling the service center.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
Wine cellar does not operate.
Not plugged in or using wrong voltage. The circuit
breaker has tripped or a fuse has blown.
Wine cellar is not cold enough.
Check the temperature control settings.
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
The door seal does not seal properly.
The front grille is obstructed.
The light does not work.
Ask the service center.
Vibrations
Check to be sure the wine cellar is level.
The wine cellar seems to make too
much noise
The wine cellar is not level.
Check the fan.
The door will not close properly.
The wine cellar is not level.
The door was reversed and not properly
re-installed.
The seal has a leak.
The shelves are out of position.
LED display is not working.
Main control board is defective.
PCB problem
There is a problem with the electrical plug.
LED display error
Temperature set point is out of range.
Buttons are not functional.
Temperature controller panel is damaged.
