CONTROL PANEL
Digital
Display 2
Digital
Display 1
ON/OFF Key
turns the wine cellar on and off. It should be in the OFF position when the unit is being
plugged in to a power source or disconnected from that source.
Digital Display 1
shows the current temperature or preset temperature of the upper zone of the
cabinet. When the
+/- Key
is pressed, the display flashes, indicating the preset temperature. If no
temperature setting operation occurs within five seconds, the system will automatically return to the
display of ambient temperature in the storage cabinet.
Preset Temperature Adjusting Key (+/-) for Upper Zone:
Press this key to adjust the preset
temperature of the upper zone. Every time it is pressed, the preset temperature of the upper zone is
increased or decreased by 1 degree. The temperature setting range for the upper zone is 54°F to
72°F (12°C to 22°C).
Digital Display 2
shows the current temperature or preset temperature of the lower zone of the
cabinet. When the
+/- Key
is pressed, the display flashes, indicating the preset temperature. If no
temperature setting operation occurs within five seconds, the system will automatically return to the
display of ambient temperature in the storage cabinet.
Preset Temperature Adjusting Key (+/-) for Lower Zone:
Press this key to adjust the preset
temperature of the lower zone. Every time it is pressed, the preset temperature of the lower zone is
increased or decreased by 1 degree. The temperature setting range for the lower zone is 41°F to
54°F (5°C to 12°C).
Lamp
ON/OFF:
This switch is controlled by the opening and closing of the door.
Compressor Indicator:
This LED is lit while the compressor is running and goes out when the
compressor turns off.
Electric Heating Indicator:
This LED is lit during operation of the electric heating device and goes out
when the device stops operating.
Test Key:
If this key is pressed in Standby mode, the compressor and electric heating device will
operate at the same time, and the Compressor Indicator and Electric Heating Indicator LEDs will turn
on simultaneously. When this key is released, the system returns to the previous Standby state. The
Test Key is invalid when the appliance is operating.
8