Summit SP6DS Скачать руководство пользователя страница 6

 

ELECTRICAL CONNECTION 

 

 
 
 
 
 

 
 
This appliance should be properly grounded for your safety.  The power cord of this appliance is equipped 
with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of 
electrical shock. 
 
Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For 
personal safety, this appliance must be properly grounded. 
 
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet. Have 
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. 
When  a  standard  2-prong  wall  outlet  is  encountered,  it  is  your  responsibility  and  obligation  to  have  it 
replaced with a properly grounded 3-prong wall outlet.  
 
To  prevent  accidental  injury,  the  cord  should  be  secured  behind  the  appliance  and  not  left  exposed  or 
dangling. 

 

The appliance should always be plugged into its own individual electrical outlet which has a voltage rating 
that  matches  the  rating  label  on  the  appliance.  This  provides  the  best  performance  and  also  prevents 
overloading  house  wiring  circuits  that  could  cause  a  fire  hazard  from  overheating.  Never  unplug  the 
appliance  by  pulling  on  the  power  cord.    Always  grip  the  plug  firmly  and  pull  straight  out  from  the 
receptacle.  Repair  or  replace  immediately  all  power  cords  that  have  become  frayed  or  otherwise 
damaged.  Do  not  use  a  cord  that  shows  cracks  or  abrasion  damage  along  its  length  or  at  either  end. 
When moving the appliance, be careful not to damage the power cord. 
 

EXTENSION CORD 

Because of potential safety hazards under certain conditions, it is strongly recommended that you do not 
use an extension cord with this appliance. However, if you must use an extension cord it is absolutely 
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding 
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes. 
 

 

CALIFORNIA CARB/SNAP DISCLOSURE

 

For products manufactured after January, 1, 2019: 

Retail food refrigeration equipment manufactured after January 1, 2019, designed to store and display 
chilled goods for commercial sale, and that use HFC-134a/R134a refrigerant are not

 

for sale in California. 

*

This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited 

Substances' for that specific end-use, in accordance with California Code of Regulations, title 17, section 
95374. This disclosure statement has been reviewed and approved by Felix Storch, Inc. and Felix Storch, 
Inc. attests, under penalty of perjury, that these statements are true and accurate.  

 

 

 

 WARNING

 

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is 
damaged, have it replaced by a qualified electrician or an authorized service center. 

 

 

Содержание SP6DS











Отзывы: