7
REVERSING THE DOOR SWING OF YOUR APPLIANCE
This unit has the capability of the door opening from either the left or right side. The unit is delivered to
you with the door opening from the left side. Should you desire to reverse the opening direction, please
follow these reversal instructions.
1. Decoration Plug 2. Door Plug 3. Hinge Cover
4. Top Hinge
5. Hook End 6. Adjustable Leg 7. Bottom Hinge
NOTE:
All parts removed must be saved to allow the door swing to be reversed.
1. Remove the top hinge cover (3) and the four screws used to fix the top hinge (4). Disconnect the top
hinge from the hook end of the self-closing mechanism, then remove the top hinge. Be careful to hold
the glass door firmly after removing the screws. (
Fig. 1
)
2. Lift up to remove the glass door and place it on a padded surface to prevent scratching.
3. Remove the decoration plug (1) from the left side of the cabinet top and then install it on the right side
at the designated position.
4. Remove
the
four
screws
that
are used to fix
the
bottom
hinge (7) and
remove bottom
hinge. Then
install it on the left side of the door bottom in the designated position. (
Fig. 2
)
5. Remove the adjustable leg (6) from the left side of the cabinet bottom and then install and tighten it at
the right side of the cabinet bottom.
6. Remove the door plug (2) from the left side of the door and then take out the hook end hidden inside
the door.
7. Set the glass door into the designated position and connect the top hinge with the hook end. Install the
four screws to connect the top hinge with the cabinet top and tighten them before the door is leveled.
8. Hide the hook end at the right side of the door and install the axle sleeve plug and axle sleeve at the
right side of the door accordingly.
9. Remove the handle from the left side of the door and install it on the right side. (
See next section
.)
