2
•
To prevent accidental injury, the cord should be secured
behind the refrigerator and not left exposed or dangling.
•
Never unplug the box by pulling the power cord. Always grip
the plug firmly and pull straight out from the receptacle.
•
Do not use an extension cord with the HBOX168. If the power
cord is too short, have a qualified electrician or service
technician install an outlet near the appliance.
Operation
Setting the time:
1. Press
SET TIME
once. By default the clock is set to AM. To
change to PM, press
–
(negative sign).
2. Press
SET TIME
to confirm the setting. This activates the HH
(hour) on the clock, and you can press either
+
or
–
to adjust
accordingly.
3. Press
SET TIME
to confirm. This activates MM (minutes) and
you can adjust accordingly using the
+/–
buttons.
4. Finally, press
SET TIME
once more to confirm all settings.
Modes:
By default, the HBOX168 operates in
NORMAL
mode. You will
see the word
On
in the window below the time display. (
On
means the refrigerator will be operating around the clock, and
you can switch to full-time operation by pressing the
NORMAL
button at any time.)
By pressing the
16 8 Energy & Sleep Saver
button, you put the
unit into
16 8
mode. This means the refrigerator will shut off at
11:00 PM every night and will start up again at 7:00 AM. This not
only saves energy, but eliminates the noise of an operating
refrigerator during the night.
If you want to turn the refrigerator off completely, press the
OFF
button. The word
Off
will appear in the mode window.
IMPORTANT: Perishable food or medicine should not be left in
the refrigerator overnight when in the
16 8
mode, or at all if in
the
Off
mode.