background image

Noise 

Cooling in the freezing appliances is enabled by the compressor, this produces 
noise.  How noisy the appliance is depends on where it is placed, how it’s used 
and how old the appliance is. 

 

After starting the appliance, the operation of the compressor may be 
louder and this does not mean something is wrong with the appliance.  The 
noise will reduce gradually, this will not affect the lifetime of the 
appliance.

 

 

Sometimes unusual and strong noises occur which is rather unusual for the 
appliance. This noise is often a consequence of inadequate placing.  To 
avoid the noise make sure the appliance is placed and leveled firmly on a 
solid base.  Make sure the appliance is not touching the wall or kitchen 
units standing next to it.  And always make sure you check the accessories 
in the interior of the appliance; they should be placed correctly in their 
positions. 

 

 
 

 

BEFORE CALLING FOR SERVICE 
 

 

Check the plug and fuse. 

 

Test the outlet with a lamp 

 

Be sure the control is not set to 

OFF 

 

Read the manual, especially the items under the Use and Care sections. 
You may find the answer to your questions. 

 

 

If you don’t find the answer to your questions in this manual, find the 
unit model number (on the upper back of the refrigerator) and contact 
your Summit Appliance Dealer.  

 

 
 
 
 
 
 
 
 
 
 
 

Specifications are Subject to Change Without  

Notice. 

 
 

Instructions for Use 

Содержание FS-56L












Отзывы: