Summit FROST-FREE BUILT-IN FREEZER, Инструкция по эксплуатации

Страница: 8 / 16

8
OPERATING YOUR APPLIANCE
It is recommended that you install the appliance in a place where the ambient temperature is between 44º
and 90ºF (7º - 32ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to fluctuate. The operating temperature range may not be
reached.
CONTROL PANEL
ON/OFF Power
To turn the appliance ON or OFF, press and hold the POWER key for 5 seconds.
Note: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
SuperFreeze
SuperFreeze is used to freeze fresh food quickly. The function overrides the thermostat control and
will make the compressor operate continuously. It is not necessary to adjust the thermostat setting
when using this function. When the function is selected, the SuperFreeze indicator will be ON. The
function can be exited by pressing the key again and the indicator will turn OFF. SuperFreeze will
turn off automatically after 8 hours.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degrees. To change the
temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the
SuperFreeze
key for 5 seconds.
Setting the Temperature Control
•
You can set the temperature bypressing the UP and DOWN keys. When you press either of the
two keys for the first time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 0°F (-18°C).
•
The temperature you are setting will increase by one degree each time you press the UP key,