3.3
Display
◆
Once initially powered on
，
the display screen (including the key light) is on full display for
3 seconds
，
and then displays the actual operation position.
◆
Normal operation display
In case of a failure, the appropriate LED lights in combination show the failure code (in recycling
display); see “3.5 Fault indication” below.
If there is no failure, the actual operation position of the refrigerator will be on display.
3.4
Shift setting
Each time the shift setting key A is pressed
，
the shift setting changes by one position. After the shift
setting has been completed, the refrigerator will operate according to the set value after 5 seconds.
From left to right, the set temperature becomes lower.
The shift regulation is
：
3.5
Fault indication
Display
Malfunction
LED1 and LED2 are lit
Refrigerator temperature sensor circuit
LED1 and LED3 are lit
Freezer defrost sensor
LED1 and LED4 are lit
Ambient temperature sensor
3.6
Temperature Control
On the
refrigerator compartment
control panel
(above), Shift
1
is the warmest setting while Shift
5
is the coldest.
For normal ambient temperatures, Shift 3 should be selected.
On the
freezer compartment control knob
(at right), select the
Mid
position
when the ambient temperature is normal.
If the ambient temperature will be lower than 55°F for an extended period of
time, the control knob should be placed at the
COLDER
position.
If the ambient temperature is higher than 90°F for a long time or a fast freeze
is needed, place the control knob in the
COLD
position.
3.7
Fruit and Vegetable Box Humidity Control
By toggling the
humidity-adjusting control
(at right), you can adjust
the humidity in the fruit and vegetable drawer.
4.
CLEANING
4.1
Defrosting
Auto-defrost for Frost-free Refrigerator
4.2
Cleaning the Interior and the Exterior of the Unit
◆
Remove all the shelves and the salad bin. To remove the salad bin, first remove the lower door
shelf.
Shift 1
Shift 2
Shift 3
Shift 4
Shift 5
8
