Summit FF711ES, Руководство пользователя

Страница: 11 / 16

8
11. Attach the shaft to the hinge bottom. Attach the refrigerator door to the shaft.
12. Rotate the middle hinge 180
o
. Attach it to the refrigerator door and secure it with a screw. (Do
not tighten the screws completely.)
13. Attach the upper hinge to the freezer door. Attach the freezer door to the middle hinge and use
the screws to attach the upper hinge. (Do not tighten the screws completely.)
14. The direction in which the door opens has now been changed, however, the following points
should be checked:
a. Make sure the door is straight.
b. Make sure that there is no space between the door gasket and the refrigerator unit itself
when the door is closed.
c. Make sure that the gasket on the hinge side is not caught between the door and the unit
when the door is opened or closed. (If the door is forced closed when the gasket it caught,
the gasket may be damaged.)
When checking the above points, if it is discovered that the door is not installed properly (this is
apt to happen at the first try), loosen the screws slowly with a socket wrench. After making sure
that the door is installed correctly, tighten all the screws holding the hinge.
15. Stand the unit back in the upright position.
TEMPERATURE CONTROL
The refrigerator temperature can be regulated by adjusting the FRIDGE CONTROL. The refrigerator
temperature is the lowest when the FRIDGE CONTROL is set to “COLDEST”.
The refrigerator temperature will vary depending on the quantity of the food stored and on the
frequency with which the door is op
ened. Set the FIRDGE CONTROL to the “COLDEST” position
only when ice cubes are needed in a hurry.
This refrigerator may turn on and off more frequently than regular size refrigerators. This is normal
due to its compact size.
Cool Power Off
•
When the COOL POWER button is pressed for three (3) seconds or more, the OFF-LED light
turns on, and the refrigerator stops operating.
•
When the COOL POWER button is pressed for three (3) seconds or more again, the OFF-LED
light turns off, and the refrigerator resumes operation.
NOTE: If operation is stopped using the COOL POWER button, as described above, allow at least
five (5) minutes before restarting in order to allow the start relay to function properly.