4
Installing of the Handle
To install the handle, follow these instructions:
1.
Carefully pull the door gasket (seal) away from the door in the area where the handle will be
attached.
2.
Place the handle over the screw holes on the outside of the door and attach it with the screws that
have been provided. Tighten the screws.
3.
Press the door gasket back into its groove.
OPERATING YOUR REFRIGERATOR
Control Panel
The refrigerator should be placed where the ambient temperature is between
50 and 95°F (10 to 35°C). If
the ambient temperature is above or below this range, the performance of the unit may be affected. For
example, placing your unit in extremely cold or hot conditions may cause the interior temperature to
fluctuate.
ON/OFF Power
To turn the appliance on or off, press the ON/OFF button.
Setting the Temperature Control
•
Once the power cord has been connected to a properly grounded outlet, press the
button.
•
Set the desired cooling temperature by pressing the corresponding button
or
. Each
depression of the buttons will raise or lower the temperature setting by 1 degree. The temperature
selected will flash in the LED display for approximately 5 seconds, then revert back to displaying
the temperature of the cabinet interior.
°C/°F
This unit has the option of displaying temperatures in either Celsius or Fahrenheit. To change the
setting, press the °C/°F button.
Interior Light
Automatically illuminates when the refrigerator door is opened.
Control panel
