Summit FF1062W, Руководство пользователя

Страница: 5 / 16

4
Before Connecting Your Refrigerator
General instructions:
Remove the base, packaging and accessories.
Remove the adhesive tape residue with a cloth soaked in a solution of water and
a mild liquid soap.
Choose the location for the refrigerator. The area should be kept clean and dry
to avoid rust.
Placement:
Allow the following minimum spacing to ensure adequate air
circulation, especially if the appliance is going to be fixed to
the wall: 2 to 3 cm (roughly 1") on each side, 10 cm (4") at
the back and 5 to 10 cm (2 to 4") on top.
Do not install the refrigerator near heat sources like stoves
or radiators, or in direct sunlight, as this will cause it to
overwork and be less efficient, thereby increasing its
consumption of electrical energy.
Do not lean the refrigerator against a wall. By complying
with this, you will help ensure the correct positioning of the
product, preventing your appliance from coming directly into
contact with walls or furniture and thereby avoiding
disagreeable noise and allowing for adequate air circulation.
Leveling:
Use the two leveling screws to level the refrigerator. Insert
and adjust them so that they rest firmly on the floor.
The front of the refrigerator should be a little higher than the
rear, which should lean slightly backwards. This facilitates
the automatic closing of the doors and helps maintain the
temperature inside the unit.