PLACING AND INSTALLATION
It is important to make sure the appliance is leveled evenly to
prevent falling
.
Two spacers attached to the appliance must be fitted onto the
upper edge of the condenser, thus preventing the appliance from
being installed too close to the wall.
Spacers are manufactured for
all-purpose functions depending on the distance of the condenser from
the wall. Therefore turn spacers correspondingly and adjust them
accordingly to the appliance.
Connection to Power Supply
Connect the appliance with the cable and plug to the power supply
socket outlet with a ground terminal (safety socket).
“DO NOT USE AN EXTENSION CORD.”
Required nominal voltage and frequency are indicated on the rating
plate. The connection to the power supply and grounding has to be
made according to current standards and regulations. The appliance
resists temporary voltage tolerance up to -15 to 10%.
Instructions for Use
5
