Summit CR2110, Инструкция по эксплуатации

Страница: 12 / 16

11
Step #5
Electrical Connection
Before proceeding further, verify that the power supply is disconnected.
Verify that the appropriate electrical supply requirements have been met.
Refer to the table on page 2 for appropriate electrical requirements. The
cooktop is supplied with a 40-inch long conduit for a connection to an
accessible junction box. The conduit consists of three insulated wires.
In
120V units , there is a hot lead conductor (black insulated tinned copper),
one insulated ground conductor (green insulated tinned copper) and a
neutral conductor (
white insulated tinned copper). In 240V units , there are
two hot lead conductors (one red, one black insulated tinned copper), one
insulated ground conductor (green insulated tinned copper).
Attach conductor wires to residence wiring in accordance with national,
state and local electric codes.
STEP #6
Final Preparations Prior to Use
Clean the cooktop before you use it for the first time. A thorough cleaning
with a cooktop cleaner will provide a clean, shiny coating on the cooktop
surface.
The next sections of the manual cover cooktop operation, maintenance
and service information.
Please keep these instructions with the SUMMIT cooktop for future
reference.
Warning
– Grounding
The entire appliance must be grounded at all times when the
electrical power supply is on. Connect the red to red, black to
black and green to ground. Do not ground the appliance with
the neutral house supply wire. A separate ground must be
used.