4
Technical Information
Models: CM405 & CM405BI (white without lock)
CM411L & CM411LBI (white with lock)
CM421BL & CM421BLBI (black with lock)
Capacity: 4.1 cubic feet
Electrical Input: 115V AC / 60Hz
Rated
Current:
1.4A
Power
Input:
100W
Refrigerant: R134a, 1.75 oz
Installation: Free-standing (CM405, CM411L, CM421BL)
Built-in (CM405BI, CM411LBI, CM421BLBI)
Unit Weight: 57 lbs
Unit
Dimensions:
19
⅞
"W x 23¼"D x 33¼"H*
* For built-in models (-BI suffix), height can be adjusted from 33¼" to 34½"
* For models with suffix ADA, height is modified to 32” for use under lower counters
Installation Instructions
Before Using Your Refrigerator:
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
1 drip tray
1 ice cube tray
2 wire shelves (models CM405, CM405BI, CM411L & CM411LBI)
2 glass shelves (models CM421BL & CM421BLBI)
1 crisper drawer with glass cover
1 handle with screws and handle seal
2 keys
(except models CM405 and CM405BI)
Before connecting the unit to the power source, let it stand for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from
handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installing the Refrigerator:
Place your unit on a floor that is strong enough to support the unit when it is fully
loaded. To level your unit, adjust the leveling legs at the bottom.
Models CM405, CM411L and CM421BL are designed to be free-standing only,
and should not be recessed or built in. On the other hand, models CM405BI,
CM411LBI and CM421BLBI are specifically designed to be built in.
Models CM405, CM411L and CM421BL: When installing, allow 5 inches of space
at the back and sides of the unit, which will allow the proper air circulation to cool
the compressor and condenser.