TREE ATTACHMENT
6
1.
Wrap the cam buckle strap around the tree and
hook the double J-Hook into the seat frame as shown in
figure 13
.
2.
Pull the free end of the strap until tight.
3.
Push down on the chair to seat it on the tree.
4.
Wrap the supplied green tourniquet buckle strap the
frame and the tree to secure (
See figure 14
).
5.
Secure the seat back to the tree by wrapping the
bungee cord around the tree and clipping it to its self.
WARNING
!
Correct tightening and adjustment of the two
attachment straps is critical. All frame contact points
must be in contact with the tree before use.
ASSEMBLY (continued)
9.
Slide the seat down onto the Arm Support Bar as
shown in
figure 9
.
10.
Use two self tapping screws to secure the seat
webbing to the Arm Support bar. Run the screws
in from the side as shown in
figure 10
. A powered
screw driver works best for this step.
11.
Position the arm rest pads as shown in
figure
11
.
12.
Push the looped end of the cam buckle
strap through the welded wire loop on the top
of the Seat Post. Loop the strap and buckle back
through the sewn loop to create a cinch knot as
shown in
figure 12
.
9
10
11
ARM PAD
(PN SU74223)
Correct
Incorrect
12
13
14
PG 6
www.summitstands.com
