Summit Professional SWC1102, Инструкция по эксплуатации

Страница: 12 / 20

12
buttons at the same time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 54°F or 12°C.)
•
The temperature you are setting will increase by one degree each time you touch the UP
symbol, and will decrease by one degree each time you touch the DOWN symbol.
•
The range of the temperature control is from 41°F to 72°F.
•
To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
CONTROL PANEL for SWC1875B
ON/OFF Power
To turn the appliance ON or OFF, touch the symbol and hold for 5 seconds.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.
LIGHT
Turn the interior light on and off with this switch.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
Indicator Light
The indicator light is located at the right lower corner of the display. The indicator light will be on
when the multi-key function is selected. To perform the multi-key function, press and hold the first
key, then press the second key for at least 5 seconds and then release all the keys
.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the
LIGHT key for 5
seconds.
Setting the Temperature Control
•
The unit has two separate temperature zones. The temperature of both zones can be set
between 41ºF and 72ºF (5ºC and 22ºC). The LOWER temperature zone is ideal for storing
white and red wine at a setting of 55°F to 72°F (13°C to 22°C). The UPPER temperature zone is
suitable for storing champagne and white wine at a setting of 41°F to 55°F (5°C to 13°C).
•
When the unit is plugged in for the first time, the unit will power up automatically to the preset
defaults. The preset temperature at the factory for the UPPER temperature zone is 50ºF (10ºC)
and for the LOWER temperature zone is 60ºF (16ºC).