9
3. Screw the bottom hinge
3
on the left designated position
but don’t tighten it. (Fig. 2)
4. Pop out the cover caps on the left side of cabinet and use them to
cover the screw holes on the right
hand side.
5. Screw the alternative left top hinge
8
, included in the fittings,
on the left hand side of cabinet. (Fig. 4)
6. Rotate the door 180°, relocate it to the designated position and lightly screw in the top hinge pin
1
.
After the door is leveled, firmly tighten top hinge pin
1
and bottom hinge
3
.
INSTALLING THE STAINLESS STEEL HANDLE
This appliance includes a stainless steel handle that is not required
to operate the unit. To install the handle, follow the instructions
below:
Locate the handle
○
1 over the mounting stub
○
3 of the door and
using the supplied Allen key, tighten the securing grub screws
○
2
to fix the handle.
OPERATING YOUR APPLIANCE
It is recommended that you install the appliance in a place where the ambient temperature is between 72º
and 78ºF (23º
–26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to fluctuate. The range of 41º
– 72ºF (5º – 22ºC) may not be
reached.
RECOMMENDED TEMPERATURE SETTINGS
Conservation
49 ~ 57ºF
10 ~ 14ºC
Red Wines
58 ~ 72ºF
15 ~ 22ºC
Dry/White Wines
48 ~ 57ºF
9 ~ 14ºC
Rosé Wines
49 ~ 51ºF
10 ~ 11ºC
Sparkling Wines
41 ~ 47ºF
5 ~ 8ºC
CONTROL PANEL
1
2
3