15
UP
+
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
-
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
Indicator Light
The indicator light is the dot located at the bottom right corner of the display. The indicator light will
be on when a multi-key function is selected. To perform a multi-key function, touch and hold the first
key, then touch the second key for at least 5 seconds and then release both keys.
Child Lock
If in 2 minutes or longer without touching any key, the child lock will be activated automatically. To
cancel the lock, touch the
UP
and
DOWN
keys at the same time for at least 5 seconds and the
indicator light will flash three times to confirm the action.
Interior Light
The unit is equipped with the interior LED lights which will be turned ON when a door is opened. The
LED type lights are designed for extremely long life. They are not user serviceable. To change them
please contact the service department.
NOTE:
Please use only the original LED light fittings provided by the manufacturer.
Sabbath Mode
Sabbath mode is available for the observance of certain religious holidays. This mode turns off
the displays, interior light and audible alarms and prevents them from turning on again. Normal
cooling operations will still take place.
To initiate Sabbath mode, touch the
POWER
and
ºC/F
keys at the same time and hold for at
least 5 seconds. The indicator light (the dot at the bottom right of the display) will flash four times
and confirm the Sabbath mode is ON.
Sabbath mode can be canceled by repeating the above process. The Sabbath Mode will
automatically turn off after 48 hours.
N
OTE:
If the unit is unplugged or power is lost or turned off, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the unit will not start.
When you use the unit for the first time or restart the unit after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and is due to the length of the activation time.
There should not be a problem once the unit has been running for a few hours.
